Update requests

libs/requests/packages/urllib3/util/retry.py

@@ -2,10 +2,11 @@ import time
 import logging
 
 from ..exceptions import (
-    ProtocolError,
     ConnectTimeoutError,
-    ReadTimeoutError,
     MaxRetryError,
+    ProtocolError,
+    ReadTimeoutError,
+    ResponseError,
 )
 from ..packages import six
 
@@ -36,7 +37,6 @@ class Retry(object):
     Errors will be wrapped in :class:`~urllib3.exceptions.MaxRetryError` unless
     retries are disabled, in which case the causing exception will be raised.
 
-
     :param int total:
         Total number of retries to allow. Takes precedence over other counts.
 
@@ -184,8 +184,8 @@ class Retry(object):
         return isinstance(err, ConnectTimeoutError)
 
     def _is_read_error(self, err):
-        """ Errors that occur after the request has been started, so we can't
-        assume that the server did not process any of it.
+        """ Errors that occur after the request has been started, so we should
+        assume that the server began processing it.
         """
         return isinstance(err, (ReadTimeoutError, ProtocolError))
 
@@ -198,8 +198,7 @@ class Retry(object):
         return self.status_forcelist and status_code in self.status_forcelist
 
     def is_exhausted(self):
-        """ Are we out of retries?
-        """
+        """ Are we out of retries? """
         retry_counts = (self.total, self.connect, self.read, self.redirect)
         retry_counts = list(filter(None, retry_counts))
         if not retry_counts:
@@ -230,6 +229,7 @@ class Retry(object):
         connect = self.connect
         read = self.read
         redirect = self.redirect
+        cause = 'unknown'
 
         if error and self._is_connection_error(error):
             # Connect retry?
@@ -251,10 +251,16 @@ class Retry(object):
             # Redirect retry?
             if redirect is not None:
                 redirect -= 1
+            cause = 'too many redirects'
 
         else:
-            # FIXME: Nothing changed, scenario doesn't make sense.
+            # Incrementing because of a server error like a 500 in
+            # status_forcelist and a the given method is in the whitelist
             _observed_errors += 1
+            cause = ResponseError.GENERIC_ERROR
+            if response and response.status:
+                cause = ResponseError.SPECIFIC_ERROR.format(
+                    status_code=response.status)
 
         new_retry = self.new(
             total=total,
@@ -262,7 +268,7 @@ class Retry(object):
             _observed_errors=_observed_errors)
 
         if new_retry.is_exhausted():
-            raise MaxRetryError(_pool, url, error)
+            raise MaxRetryError(_pool, url, error or ResponseError(cause))
 
         log.debug("Incremented Retry for (url='%s'): %r" % (url, new_retry))
 

libs/requests/packages/urllib3/util/ssl_.py

@@ -4,18 +4,84 @@ from hashlib import md5, sha1
 from ..exceptions import SSLError
 
 
-try:  # Test for SSL features
-    SSLContext = None
-    HAS_SNI = False
+SSLContext = None
+HAS_SNI = False
+create_default_context = None
 
-    import ssl
+import errno
+import ssl
+
+try:  # Test for SSL features
     from ssl import wrap_socket, CERT_NONE, PROTOCOL_SSLv23
-    from ssl import SSLContext  # Modern SSL?
     from ssl import HAS_SNI  # Has SNI?
 except ImportError:
     pass
 
 
+try:
+    from ssl import OP_NO_SSLv2, OP_NO_SSLv3, OP_NO_COMPRESSION
+except ImportError:
+    OP_NO_SSLv2, OP_NO_SSLv3 = 0x1000000, 0x2000000
+    OP_NO_COMPRESSION = 0x20000
+
+try:
+    from ssl import _DEFAULT_CIPHERS
+except ImportError:
+    _DEFAULT_CIPHERS = (
+        'ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+HIGH:'
+        'DH+HIGH:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+HIGH:RSA+3DES:ECDH+RC4:'
+        'DH+RC4:RSA+RC4:!aNULL:!eNULL:!MD5'
+    )
+
+try:
+    from ssl import SSLContext  # Modern SSL?
+except ImportError:
+    import sys
+
+    class SSLContext(object):  # Platform-specific: Python 2 & 3.1
+        supports_set_ciphers = sys.version_info >= (2, 7)
+
+        def __init__(self, protocol_version):
+            self.protocol = protocol_version
+            # Use default values from a real SSLContext
+            self.check_hostname = False
+            self.verify_mode = ssl.CERT_NONE
+            self.ca_certs = None
+            self.options = 0
+            self.certfile = None
+            self.keyfile = None
+            self.ciphers = None
+
+        def load_cert_chain(self, certfile, keyfile):
+            self.certfile = certfile
+            self.keyfile = keyfile
+
+        def load_verify_locations(self, location):
+            self.ca_certs = location
+
+        def set_ciphers(self, cipher_suite):
+            if not self.supports_set_ciphers:
+                raise TypeError(
+                    'Your version of Python does not support setting '
+                    'a custom cipher suite. Please upgrade to Python '
+                    '2.7, 3.2, or later if you need this functionality.'
+                )
+            self.ciphers = cipher_suite
+
+        def wrap_socket(self, socket, server_hostname=None):
+            kwargs = {
+                'keyfile': self.keyfile,
+                'certfile': self.certfile,
+                'ca_certs': self.ca_certs,
+                'cert_reqs': self.verify_mode,
+                'ssl_version': self.protocol,
+            }
+            if self.supports_set_ciphers:  # Platform-specific: Python 2.7+
+                return wrap_socket(socket, ciphers=self.ciphers, **kwargs)
+            else:  # Platform-specific: Python 2.6
+                return wrap_socket(socket, **kwargs)
+
+
 def assert_fingerprint(cert, fingerprint):
     """
     Checks if given fingerprint matches the supplied certificate.
@@ -91,42 +157,98 @@ def resolve_ssl_version(candidate):
     return candidate
 
 
-if SSLContext is not None:  # Python 3.2+
-    def ssl_wrap_socket(sock, keyfile=None, certfile=None, cert_reqs=None,
-                        ca_certs=None, server_hostname=None,
-                        ssl_version=None):
-        """
-        All arguments except `server_hostname` have the same meaning as for
-        :func:`ssl.wrap_socket`
+def create_urllib3_context(ssl_version=None, cert_reqs=ssl.CERT_REQUIRED,
+                           options=None, ciphers=None):
+    """All arguments have the same meaning as ``ssl_wrap_socket``.
 
-        :param server_hostname:
-            Hostname of the expected certificate
-        """
-        context = SSLContext(ssl_version)
-        context.verify_mode = cert_reqs
+    By default, this function does a lot of the same work that
+    ``ssl.create_default_context`` does on Python 3.4+. It:
 
-        # Disable TLS compression to migitate CRIME attack (issue #309)
-        OP_NO_COMPRESSION = 0x20000
-        context.options |= OP_NO_COMPRESSION
+    - Disables SSLv2, SSLv3, and compression
+    - Sets a restricted set of server ciphers
 
-        if ca_certs:
-            try:
-                context.load_verify_locations(ca_certs)
-            # Py32 raises IOError
-            # Py33 raises FileNotFoundError
-            except Exception as e:  # Reraise as SSLError
+    If you wish to enable SSLv3, you can do::
+
+        from urllib3.util import ssl_
+        context = ssl_.create_urllib3_context()
+        context.options &= ~ssl_.OP_NO_SSLv3
+
+    You can do the same to enable compression (substituting ``COMPRESSION``
+    for ``SSLv3`` in the last line above).
+
+    :param ssl_version:
+        The desired protocol version to use. This will default to
+        PROTOCOL_SSLv23 which will negotiate the highest protocol that both
+        the server and your installation of OpenSSL support.
+    :param cert_reqs:
+        Whether to require the certificate verification. This defaults to
+        ``ssl.CERT_REQUIRED``.
+    :param options:
+        Specific OpenSSL options. These default to ``ssl.OP_NO_SSLv2``,
+        ``ssl.OP_NO_SSLv3``, ``ssl.OP_NO_COMPRESSION``.
+    :param ciphers:
+        Which cipher suites to allow the server to select.
+    :returns:
+        Constructed SSLContext object with specified options
+    :rtype: SSLContext
+    """
+    context = SSLContext(ssl_version or ssl.PROTOCOL_SSLv23)
+
+    if options is None:
+        options = 0
+        # SSLv2 is easily broken and is considered harmful and dangerous
+        options |= OP_NO_SSLv2
+        # SSLv3 has several problems and is now dangerous
+        options |= OP_NO_SSLv3
+        # Disable compression to prevent CRIME attacks for OpenSSL 1.0+
+        # (issue #309)
+        options |= OP_NO_COMPRESSION
+
+    context.options |= options
+
+    if getattr(context, 'supports_set_ciphers', True):  # Platform-specific: Python 2.6
+        context.set_ciphers(ciphers or _DEFAULT_CIPHERS)
+
+    context.verify_mode = cert_reqs
+    if getattr(context, 'check_hostname', None) is not None:  # Platform-specific: Python 3.2
+        context.check_hostname = (context.verify_mode == ssl.CERT_REQUIRED)
+    return context
+
+
+def ssl_wrap_socket(sock, keyfile=None, certfile=None, cert_reqs=None,
+                    ca_certs=None, server_hostname=None,
+                    ssl_version=None, ciphers=None, ssl_context=None):
+    """
+    All arguments except for server_hostname and ssl_context have the same
+    meaning as they do when using :func:`ssl.wrap_socket`.
+
+    :param server_hostname:
+        When SNI is supported, the expected hostname of the certificate
+    :param ssl_context:
+        A pre-made :class:`SSLContext` object. If none is provided, one will
+        be created using :func:`create_urllib3_context`.
+    :param ciphers:
+        A string of ciphers we wish the client to support. This is not
+        supported on Python 2.6 as the ssl module does not support it.
+    """
+    context = ssl_context
+    if context is None:
+        context = create_urllib3_context(ssl_version, cert_reqs,
+                                         ciphers=ciphers)
+
+    if ca_certs:
+        try:
+            context.load_verify_locations(ca_certs)
+        except IOError as e:  # Platform-specific: Python 2.6, 2.7, 3.2
+            raise SSLError(e)
+        # Py33 raises FileNotFoundError which subclasses OSError
+        # These are not equivalent unless we check the errno attribute
+        except OSError as e:  # Platform-specific: Python 3.3 and beyond
+            if e.errno == errno.ENOENT:
                 raise SSLError(e)
-        if certfile:
-            # FIXME: This block needs a test.
-            context.load_cert_chain(certfile, keyfile)
-        if HAS_SNI:  # Platform-specific: OpenSSL with enabled SNI
-            return context.wrap_socket(sock, server_hostname=server_hostname)
-        return context.wrap_socket(sock)
-
-else:  # Python 3.1 and earlier
-    def ssl_wrap_socket(sock, keyfile=None, certfile=None, cert_reqs=None,
-                        ca_certs=None, server_hostname=None,
-                        ssl_version=None):
-        return wrap_socket(sock, keyfile=keyfile, certfile=certfile,
-                           ca_certs=ca_certs, cert_reqs=cert_reqs,
-                           ssl_version=ssl_version)
+            raise
+    if certfile:
+        context.load_cert_chain(certfile, keyfile)
+    if HAS_SNI:  # Platform-specific: OpenSSL with enabled SNI
+        return context.wrap_socket(sock, server_hostname=server_hostname)
+    return context.wrap_socket(sock)

libs/requests/packages/urllib3/util/url.py

@@ -40,6 +40,48 @@ class Url(namedtuple('Url', url_attrs)):
             return '%s:%d' % (self.host, self.port)
         return self.host
 
+    @property
+    def url(self):
+        """
+        Convert self into a url
+
+        This function should more or less round-trip with :func:`.parse_url`. The
+        returned url may not be exactly the same as the url inputted to
+        :func:`.parse_url`, but it should be equivalent by the RFC (e.g., urls
+        with a blank port will have : removed).
+
+        Example: ::
+
+            >>> U = parse_url('http://google.com/mail/')
+            >>> U.url
+            'http://google.com/mail/'
+            >>> Url('http', 'username:password', 'host.com', 80,
+            ... '/path', 'query', 'fragment').url
+            'http://username:password@host.com:80/path?query#fragment'
+        """
+        scheme, auth, host, port, path, query, fragment = self
+        url = ''
+
+        # We use "is not None" we want things to happen with empty strings (or 0 port)
+        if scheme is not None:
+            url += scheme + '://'
+        if auth is not None:
+            url += auth + '@'
+        if host is not None:
+            url += host
+        if port is not None:
+            url += ':' + str(port)
+        if path is not None:
+            url += path
+        if query is not None:
+            url += '?' + query
+        if fragment is not None:
+            url += '#' + fragment
+
+        return url
+
+    def __str__(self):
+        return self.url
 
 def split_first(s, delims):
     """
@@ -84,7 +126,7 @@ def parse_url(url):
     Example::
 
         >>> parse_url('http://google.com/mail/')
-        Url(scheme='http', host='google.com', port=None, path='/', ...)
+        Url(scheme='http', host='google.com', port=None, path='/mail/', ...)
         >>> parse_url('google.com:80')
         Url(scheme=None, host='google.com', port=80, path=None, ...)
         >>> parse_url('/foo?bar')
@@ -162,7 +204,6 @@ def parse_url(url):
 
     return Url(scheme, auth, host, port, path, query, fragment)
 
-
 def get_host(url):
     """
     Deprecated. Use :func:`.parse_url` instead.